Pan Type Distributor & Redistributor (KPT PTLD-5/PTRD-5)

Pan Type Distributor & Redistributor (KPT PTLD-5/PTRD-5)

Pan type distributor provides liquid holdup in the distributor which can operate for very low liquid flow. Vapour passes through circular or rectangular gas risers. Distributor can be used even from as low as 100mm & above upto 800 mm column diameter with pan.

Key Characteristics

For fouling application pan type distributor can be used with V-Notch Tubes. It can be successfully applied for random Packing.

Liquid loads can be possible even from 1 m3/m2.hr to 80 m3/m2.hr. It can be used for both structured & random packing.

Liquid loads may vary from 2m3/m2hr to 50 m3/m2hr. Less sensitive to fouling and ganging of liquid flow.

FAQ'S

The pan-type distributor can be made in both single and multi-piece construction.

It is a high-performance distributor consisting of critically sized orifices, uniformly distributed for proper liquid downflow, and an adequate open area for the upward flow of vapor.

Liquid Distributors are internals installed over the packed bed, which provides a finite liquid distribution over the packed bed.

It is used to provide liquid holdup in the distributor which can operate for very low liquid flow. Vapour passes through circular or rectangular gas risers. The distributor can be used even from as low as 100mm & above up to 800 mm column diameter with the pan.

A liquid distributor is a device that is used to spread liquid when it enters a packed column. Methods of evaluating the effectiveness of a liquid distributor & redistributor are to evenly distribute the liquid entering a packed column.

ArabicEnglishFrenchGermanRussianSpanish
Scroll to Top