+91-7249218708
Channel Type Distributor & Redistributor
Channel Type Distributor & Redistributor
CHANNEL TYPE DISTRIBUTORS & REDISTRIBUTORS WITH TUBES (KPT LD-1/KPT RD-1)
Channel type distributor is one of the regularly used distributors. These are especially successful for structured packing.
It can be supplied from 200 to 2000 mm diameter. Diameter up to 800mm can be manufactured in a single segment and can be manufactured with top trough up to 2 metres diameter in segmented pattern.
Key Characteristics
Its channelized design causes the liquid to distribute evenly & to cover the maximum cross sectional area of the packing. Also results in low pressure drop due to even distribution of vapour flow. The distributor can be supplied with bottom holes or with drip tubes. Drip tube can be applied where the fouling conditions are foreseen.
FAQ'S
Channel type distributor is one of the regularly used distributors. These are especially successful for structured packing. It allows the liquid to distribute evenly & to cover the maximum cross-sectional area of the packing.
Channel type distributors can be supplied from 200 to 2000 mm diameter. Diameter up to 800mm can be manufactured in a single segment and can be manufactured with a top trough up to 2 meters diameter in the segmented pattern.
A liquid distributor is a device that is used to spread liquid when it enters a packed column. Methods of evaluating the effectiveness of a liquid distributor & redistributor are to evenly distribute the liquid entering a packed column.
Channel type distributor is used with specially sized bottom orifices for even liquid distribution. To provide uniform cross flow and to reduce distributor height, the center channel and side channels are connected at the same level.
